Concrete Mixer Truck 9m3

Home » Products » Special Heavy Truck » Concrete Mixer Truck » Concrete Mixer Truck 9m3
 Concrete Mixer Truck 9m<sup>3</sup>

Concrete mixer truck is a vehicle specially designed for the transportation of concrete for construction. Motive power is produced by the power takeoff then passed to the hydraulic pump. The hydraulic pump produces hydraulic energy which is transmitted to hydraulic motor for conversion into kinetic energy. This energy is then transferred to the mixing drum through the effect of decelerating the speed of rotation.
Users can adjust the angle of the hydraulic pump servo handle to control the rotating speed and the positive or negative rotation of the mixing drum. This facilitates charging, stirring, mixing, and discharging operations.

As a specialized concrete mixer truck manufacturer in China, we can produce various concrete mixer trucks of different agitating capacities.
The concrete mixer truck is fitted with a diesel 4-stroke direct injection engine which has little emission levels.
Our concrete mixer truck 9m3 and other equipment have received ISO9001-2000 certification and 3C certification. They sell well in Vietnam, Myanmar, Malaysia, Peru, Cuba, Chad, Sudan, Egypt, Ghana, Nigeria, South Africa, Ethiopia, Angola, Algeria, Ukraine, Russia, and more. Please contact us if you intend to buy and of our products.

Parameters of Concrete Mixer Truck 9m3

Engine Type Diesel 4-stroke direct injection engine,6-cylinder in-line with water cooling, turbo-charging & intercooling
Displacement 9.726 liters
Maximum Output 336HP
Max torque 1250NM@1400-1600rpm
Bore 126mm
Stroke 130mm
Mean Piston speed 9.5m/s
Compression ratio 16:1
Specific fuel consumption 197g/kwh
Engine oil filling quantity 19liters
Cooling system filling quantity (long-term filling) 40liters
Thermostat with 71℃ opening begin rigid fan clutch model ¢430
Type Single-plate dry clutch, mechanically operating with air assisted.
Plate diameter ¢420mm
Gear box Model Fuller RT-11509C
No. of speeds 9 forward,1 reverse
Forward ratio 12.42;8.26;6.08;4.53;3.36; 2.47;1.81;1.35:1
Reverse ratio 12.99
Front axle Type Elliot axle
Max. load 6500kg
Tandem axle Type Pressed axle housing, single reduction with planetary wheel redactor
Ratio 5.73
Max. load 2×13000kg
Front suspension 9 semi-elliptic leaf springs with shock absorbers
Rear suspension 12 semi-elliptic leaf springs with swing springs
Frame Type Parallel ladder with U-profiles and riveted cross members
Steering Model ZF8098
Type Hydraulic power steering
Ratio 26.2
Fuel and capacity 300 liters, lockable
Wheels and tires Rim 8.5-24
Tire 12.00-20
No. of tires 10
Spare wheel carrier With one spare wheel
Brakes Service brake Dual circuit pneumatic brake
Parking brake Spring energy, compressed air operating on rear wheels
Auxiliary brake Engine exhaust brake
Cabin All-steel forward control, 70°hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial , hydraulically damped adjustable driver's seat & rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, safety belt, air conditioner
Capability 2 persons
Electric equipment Operating voltage 24V,negative grounded
Starter 24V,5.4kw
Alternator 28V,756w
Batteries 2×12v, 135Ah Cigar-lighter, horn headlamp, fog light, reverse light.
Instrument panel Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant
Front wheel alignment Camber
Caster
King pin inclination
Toe-in (measured at the wheel diameter ¢ 648mm with cross-ply tire) 3-4.5mm
Overall dimension (length × width × height) Overall dimension (length × width × height) 8715×2500×3850mm
Wheelbase 3625+1350mm
Track Front 2022mm
Rear 2041mm
Approach angle 16°
Departure angle 35°
Front overhang 1500mm
Rear overhang 2215mm
Mass parameter Dead weight 13100kg
Pay loading 11900kg
Total mass 25000kg
Performance Driving type 6×4
Maximum driving speed (km/h) 90/102km/h
Minimum turning circle 23m
Body Drum Volume 16.5m3
Agitating capacity 9m3
Drum slope 11°
Drum rotating speed 0-16r/min
Water tank volume 400liters
Discharged remain ratio <0.5%
Feedback Form
Related Products
Other Products
  • Road RollerA Road roller compresses surfaces through making use of its weight. A pneumatic-tyred roller is used to do the initial compaction of substrates. The roller has two rows (front and back) of pneumatic tyres. The ...
  • 6×6 Tractor TruckWe produce 6×6 trucks with the support of an efficient research and design team of the technical center, making the product superior to others.
    This all-wheel drive truck is extensively used in oil fields, mines, for firefighting, etc.
  • Tank Semi TrailerThe tank body of tank semi trailer can be made of stainless steel and carbon steel. If required, aluminum alloy, pure aluminum tank, lining rubber, plastic tank, glass steel tank are also available choices.
  • 8×4 Tipper8×4 tipper is usually used in civil engineering. It can work together with the excavating machine, shovel wheel loader, and belt conveyor to load, transport and discharge loose materials (such as dirt, gravel, sand, and ...