Concrete Mixer Truck 8m3

Home » Products » Special Heavy Truck » Concrete Mixer Truck » Concrete Mixer Truck 8m3
Concrete Mixer Truck 8m<sup>3</sup>

Concrete mixer truck 8m3 is a vehicle specially used to transport concrete for construction. All the concrete mixer trucks are equipped with a mixing drum which keeps mixing the concrete during transportation to prevent solidification.
Users should clean the interior of the mixing drum after using it, because sclerous concrete makes the volume of mixing drum smaller and smaller.
As a specialized concrete mixer truck manufacturer in China, we have the capacity to produce various concrete mixer trucks of different agitating capacities.
The concrete mixer truck is fitted with a diesel 4-stroke direct injection engine which produces little greenhouse gases and minimal black smoke emissions.

Our concrete mixer trucks and other equipment have received ISO9001-2000 certification and 3C certification. They sell well in Vietnam, Myanmar, Malaysia, Peru, Cuba, Chad, Sudan, Egypt, Ghana, Nigeria, South Africa, Ethiopia, Angola, Algeria, Ukraine, Russia, and more. We look forward to receiving your order.

Parameters of Concrete Mixer Truck 8m3

Engine Type Diesel 4-stroke direct injection engine,6-cylinder in-line with water cooling, turbo-charging & intercooling
Displacement 9.726 liters
Maximum Output 336HP
Max torque 1250NM@1400-1600rpm
Bore 126mm
Stroke 130mm
Mean Piston speed 9.5m/s
Compression ratio 16:1
Specific fuel consumption 197g/kwh
Engine oil filling quantity 19liters
Cooling system filling quantity (long-term filling) 40liters
Thermostat with 71℃ opening begin rigid fan clutch model ¢430
Type Single-plate dry clutch, mechanically operating with air assisted.
Plate diameter ¢420mm
Gear box Model Fuller RT-11509C
No. of speeds 9 forward,1 reverse
Forward ratio 12.42; 8.26; 6.08; 4.53; 3.36; 2.47; 1.81; 1.35:1
Reverse ratio 12.99
Front axle Type Elliot axle
Max. load 6500kg
Tandem axle Type Pressed axle housing, single reduction with planetary wheel redactor
Ratio 5.73
Max. load 2×13000kg
Front suspension 9 semi-elliptic leaf springs with shock absorbers
Rear suspension 12 semi-elliptic leaf springs with swing springs
Frame Type Parallel ladder with U-profiles and riveted cross members
Steering Model ZF8098
Type Hydraulic power steering
Ratio 26.2
Fuel and capacity 300 liters, lockable
Wheels and tires Rim 8.5-24
Tire 12.00-20
No. of tires 10
Spare wheel carrier With one spare wheel
Brakes Service brake Dual circuit pneumatic brake
Parking brake Spring energy, compressed air operating on rear wheels
Auxiliary brake Engine exhaust brake
Cabin All-steel forward control, 70°hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial , hydraulically damped adjustable driver's seat & rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, safety belt, air conditioner
Capability 3 persons
Electric equipment Operating voltage 24V,negative grounded
Starter 24V,5.4kw
Alternator 28V,756w
Batteries 2×12v, 135Ah Cigar-lighter, horn headlamp, fog light, reverse light.
Instrument panel Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant
Front wheel alignment Camber
Caster
King pin inclination
Toe-in (measured at the wheel diameter ¢ 648mm with cross-ply tyre) 3-4.5mm
Overall dimension (length × width × height) Overall dimension (length × width × height) 8204×2496×3850mm
Wheelbase 3200+1350mm
Track Front 2022mm
Rear 1830mm
Approach angle 16°
Departure angle 36°
Front overhang 1500mm
Rear overhang 1250mm
Mass parameter Dead weight 12800kg
Pay loading 12200kg
Total mass 25000kg
Performance Driving type 6×4
Maximum driving speed (km/h) 90/102km/h
Minimum turning circle 23m
Body Drum Volume 16.5m3
Agitating capacity 8m3
Drum slope 11°
Drum rotating speed 0-16r/min
Water tank volume 400 liters
Discharged remain ratio <0.5%
Feedback Form
Related Products
Other Products
  • Bulk Cement Semi TrailerBulk cement semi trailer is also known as powder particle material trailer. It is made up of a special-purpose automotive chassis, bulk cement tank body, automatic discharging device and other parts.
  • 4×2 Tractor TruckWe adopt the most popular molding techniques when designing the driving cab of the 4×2 tractor truck. Its component parts are the ones that are commonly used in heavy-duty trucks.
    Our 4×2 tractor truck ...
  • Container Semi TrailerContainer semi trailer, just as the name suggests, is specifically designed for the transportation of containers. Other types include semi trailers, full trailers, and double trailers. Of these, the semi trailers are the ...
  • Crawler BulldozerThe crawler bulldozer is a kind of semi-rigid suspended vehicle, which has power shift and adopts a hydraulic control system.
    Our crawler bulldozer is suitable for road construction, port building, water and ...