4×2 Tractor Truck

Home » Products » Tractor Truck » 4×2 Tractor Truck
4×2 Tractor Truck

Descriptions of 4×2 Tractor Truck
We adopt the most popular molding techniques when designing the driving cab of the 4×2 tractor truck. Its component parts are the ones that are commonly used in heavy-duty trucks.
Our 4×2 tractor truck has received ISO9001-2000, 3C and other quality certifications.
Standard tractor trucks are mainly used for trans-provincial, long-distance transportation of goods in applications that may involve overload operations.

4×2 is a reference used to represent the drive of heavy trucks where the former digit represents the pairs of tires while the latter digit represents the number of tire axles of the pairs. Both numbers are divided by two to get the number of axles (and driving axle). Taking the example of 4×2, the truck has 2 axles in total with 1 as the driving axle.

As a professional tractor truck manufacturer in China, we have the capacity to produce other driving types for heavy trucks, such as 6*4, 6*2, 8*4, etc. All these tractors use the newest diesel 4-stroke direct injection engine.

The manufacturing costs of the 4×2 trucktor truck is low and it exhausts little greenhouse gases and black smoke. It is an ideal vehicle for the transportation of goods.
Our 4×2 trucks are well received in Vietnam, Myanmar, Malaysia, Peru, Cuba, Chad, Sudan, Egypt, Ghana, Nigeria, South Africa, Ethiopia, Angola, Algeria, Ukraine, Russia, and more.

Parameters of 4×2 Tractor Truck

Engine Type Diesel 4-stroke direct injection engine,6-cylinder in-line with water cooling, turbo-charging & intercooling
Displacement 9.726 liters
Maximum Output 290HP@2200rpm(213KW@2200rpm)
Max torque 1070NM@1400-1600rpm
Bore 126mm
Stroke 130mm
Mean Piston speed 9.5m/s
Compression ratio 16:1
Specific fuel consumption 197g/kwh
Engine oil filling quantity 19liters
Cooling system filling quantity (long-term filling) 40liters
Thermostat with 71℃ opening begin rigid fan clutch model GF-¢420
Type Single-plate dry clutch, mechanically operating with air assisted.
Plate diameter ¢420mm
Gear box Model Fuller RT-11509C
No. of speeds 9 forward,1 reverse
Forward ratio 12.11;8.08;5.93;4.42;3.36; 2.41;1.32;1.00:1
Reverse ratio 12.66
Front axle Type Rigid stub axle with double T-cross members
Max. load 6500kg
Tandem axle Type Pressed axle housing, single reduction with planetary wheel redactor
Ratio 4.8
Max. load 13000kg
Front suspension 9 semi-elliptic leaf springs with shock absorbers
Rear suspension 12 semi-elliptic leaf springs with swing springs
Frame Type Parallel ladder with U-profiles and riveted cross members
Steering Type ZF8098
Model Hydraulic power steering
Ratio 26.2
Fuel and capacity 380 liters, lockable
Wheels and tires Rim 8.00-20
Tire 12.00R20
No. of tires 6
Spare wheel carrier With one spare wheel
Brakes Service brake Dual circuit pneumatic brake
Parking brake Spring energy, compressed air operating on rear wheels
Auxiliary brake Engine exhaust brake
Cabin All-steel forward control, 70°hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial , hydraulically damped adjustable driver's seat & rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder. safety belt, air conditioner
Capability 2 persons
Electric equipment Operating voltage 24V,negative grounded
Starter 24V,5.4kw
Alternator 28V,758w
Batteries 2×12v, 135Ah Cigar-lighter, horn headlamp, fog light, reverse light.
Instrument panel Active check control with indicators, with this instrument the daily manual checks on the vehicle and combined indicators of compressed air pressure, coolant
Front wheel alignment Camber
King pin inclination
Toe-in (measured at the wheel diameter ¢ 648mm with cross-ply tyre) 3-4.5mm
Overall dimension (length × width × height) Overall dimension (length × width × height) 6110×2496×3563/3668mm
Wheelbase 3500mm
Track Front 2022mm
Rear 1830mm
Approach angle 16°
Departure angle 42°
Front overhang 1500mm
Rear overhang 1110mm
Mass parameter Rated traction weight 31000kg
Maximum loading capacity at fifth wheel 10660kg
Dead weight 7210kg
Gross vehicle weight 18000kg
Gross combination weight 49000kg
Performance Driving type 4×2
Maximum driving speed (km/h) 102km/h
Feedback Form
Other Products
  • Road RollerA Road roller compresses surfaces through making use of its weight. A pneumatic-tyred roller is used to do the initial compaction of substrates. The roller has two rows (front and back) of pneumatic tyres. The ...
  • Concrete Pump TruckIn order to produce high-quality concrete pump trucks, we have adopted advanced technology such as computer simulation, optimization of the hydraulic system and boom construction, as well as used imported materials ...
  • 6×4 Tipper6×4 tipper is made up of an automotive chassis, hydraulic lifting mechanism, loading body and power take-off, etc. It can work together with the excavating machine, shovel wheel loader, and belt conveyor to load ...
  • Container Semi TrailerContainer semi trailer, just as the name suggests, is specifically designed for the transportation of containers. Other types include semi trailers, full trailers, and double trailers. Of these, the semi trailers are the ...